A concept for the in situ consolidation of thermoset matrix prepreg during automated lay-upLUKASZEWICZ, Dirk H.-J. A; POTTER, Kevin D; EALES, Jonathan et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 538-543, issn 1359-8368, 6 p.Article

X-ray microtomography applications for quantitative and qualitative analysis of porosity in woven glass fiber reinforced thermoplasticMADRA, Anna; NEMR EL HAJJ; BENZEGGAGH, Malk et al.Composites science and technology. 2014, Vol 95, pp 50-58, issn 0266-3538, 9 p.Article

Photoelastic study of stresses in the vicinity of a unique void in a fibre-reinforced model composite under compressionLIEBIG, W. V; LEOPOLD, C; SCHULTE, K et al.Composites science and technology. 2013, Vol 84, pp 72-77, issn 0266-3538, 6 p.Article

Oxidation mechanism of ZrB_2/SiC ceramics based on phase-field modelYINJI MA; XUEFENG YAO; WENFENG HAO et al.Composites science and technology. 2012, Vol 72, Num 10, pp 1196-1202, issn 0266-3538, 7 p.Article

Wood-derived copper―graphite composites produced via additive-assisted electrodepositionJOHNSON, M. T; CHILDERS, A. S; DE CARLO, F et al.Composites science and technology. 2013, Vol 89, pp 61-68, issn 0266-3538, 8 p.Article

Dynamic capillary impact on longitudinal micro-flow in vacuum assisted impregnation and the unsaturated permeability of inner fiber towsMIN LI; SHAOKAI WANG; YIZHUO GU et al.Composites science and technology. 2010, Vol 70, Num 11, pp 1628-1636, issn 0266-3538, 9 p.Article

A mesoscale ultrasonic attenuation finite element model of composites with random-distributed voidsYALIN YU; JINRUI YE; YANG WANG et al.Composites science and technology. 2013, Vol 89, pp 44-51, issn 0266-3538, 8 p.Article

Features of the hydrostatic piezoelectric response of a novel 2-2-0 composite based on single-domain 0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 crystalTOPOLOV, Vitaly Yu; GLUSHANIN, Sergei V.Composites science and technology. 2009, Vol 69, Num 15-16, pp 2532-2537, issn 0266-3538, 6 p.Article

Stretching induces pore formation in the β-nucleated polypropylene/graphene oxide compositeJIAN DAI; LIU, Xiao-Hao; YANG, Jing-Hui et al.Composites science and technology. 2014, Vol 99, pp 59-66, issn 0266-3538, 8 p.Article

Effect of dual scale porosity on the overall permeability of fibrous structuresMOHAMMAD WASEEM TAHIR; HALLSTRÖM, Stefan; AKERMO, Malin et al.Composites science and technology. 2014, Vol 103, pp 56-62, issn 0266-3538, 7 p.Article

3D damage characterisation and the role of voids in the fatigue of wind turbine blade materialsLAMBERT, J; CHAMBERS, A. R; SINCLAIR, I et al.Composites science and technology. 2012, Vol 72, Num 2, pp 337-343, issn 0266-3538, 7 p.Article

Permeability of textile reinforcements : Simulation, influence of shear and validationVERLEYE, B; CROCE, R; GRIEBEL, M et al.Composites science and technology. 2008, Vol 68, Num 13, pp 2804-2810, issn 0266-3538, 7 p.Article

Effects of chain rigidity/flexibility of polyimides on morphological structures and thermal diffusivity of hBN-filled compositesTANIMOTO, Mizuka; ANDO, Shinji.Composites science and technology. 2014, Vol 99, pp 103-108, issn 0266-3538, 6 p.Article

A predictive model for ultrasonic attenuation coefficient in particulate compositesMYLAVARAPU, Phani; WOLDESENBET, Eyassu.Composites. Part B, Engineering. 2010, Vol 41, Num 1, pp 42-47, issn 1359-8368, 6 p.Article

Open structured in comparison with dense multi-walled carbon nanotube buckypapers and their compositesTRAKAKIS, George; TASIS, Dimitrios; AGGELOPOULOS, Christos et al.Composites science and technology. 2013, Vol 77, pp 52-59, issn 0266-3538, 8 p.Article

Measurement of voids in composites by X-ray Computed TomographyNIKISHKOV, Yuri; AIROLDI, Luca; MAKEEV, Andrew et al.Composites science and technology. 2013, Vol 89, pp 89-97, issn 0266-3538, 9 p.Article

Polymer/bioactive glass nanocomposites for biomedical applications: A reviewBOCCACCINI, Aldo R; EROL, Melek; STARK, Wendelin J et al.Composites science and technology. 2010, Vol 70, Num 13, pp 1764-1776, issn 0266-3538, 13 p.Conference Paper

Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermographyRAVEY, C; RUIZ, E; TROCHU, F et al.Composites science and technology. 2014, Vol 99, pp 96-102, issn 0266-3538, 7 p.Article

Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical propertiesHERNANDEZ, S; SKET, F; GONZALEZ, C et al.Composites science and technology. 2013, Vol 85, pp 73-82, issn 0266-3538, 10 p.Article

Indomethacin/Cu/LDPE porous composite for medicated copper intrauterine devices with controlled release performancesCHENG QI; XIANPING XIA; WEIWEI ZHANG et al.Composites science and technology. 2012, Vol 72, Num 3, pp 428-434, issn 0266-3538, 7 p.Article

Internal stresses and voids in SiC particle reinforced aluminum composites for heat sink applicationsSCHÖBEL, M; ALTENDORFER, W; DEGISCHER, H. P et al.Composites science and technology. 2011, Vol 71, Num 5, pp 724-733, issn 0266-3538, 10 p.Article

Morphology and degradation properties of PCL/HYAFF11^® composite scaffolds with multi-scale degradation rateGUARINO, V; LEWANDOWSKA, M; BIL, M et al.Composites science and technology. 2010, Vol 70, Num 13, pp 1826-1837, issn 0266-3538, 12 p.Conference Paper

Micromechanics-based constitutive modeling of plastic yielding and damage mechanisms in polymer―clay nanocomposites: Application to polyamide-6 and polypropylene-based nanocompositesMESBAH, A; ZAÏRI, F; NAÏT-ABDELAZIZ, M et al.Composites science and technology. 2014, Vol 101, pp 71-78, issn 0266-3538, 8 p.Article

Effects of defects on interlaminar tensile fatigue behavior of carbon/epoxy compositesSEON, Guillaume; MAKEEV, Andrew; NIKISHKOV, Yuri et al.Composites science and technology. 2013, Vol 89, pp 194-201, issn 0266-3538, 8 p.Article

Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre compositesSHAH, Darshil U; SCHUBEL, Peter J; LICENCE, Peter et al.Composites science and technology. 2012, Vol 72, Num 15, pp 1909-1917, issn 0266-3538, 9 p.Article